192.168.188.1 is the private IP address being used by most of the extenders. Some of the IP addresses are owned by most of the routers. So, it is always good to know about the login for the IP addresses that are common. The link for the login for this IP address is192.168. 188.1/login. So, in order to know how to complete the login for 192.168.188.1, you need to find the steps mentioned in this article.

Steps for 192.168. 188.1/login

The process for 192.168.188.1 is not the difficult one. It consists of a few steps only that will get completed in no time. So, have a look at the steps properly in order to complete the login, and then do the configuration of the network accordingly.

Step 1: First, connect your system with the WiFi extender via the wireless or wired method.

Step 2: Now, in your system, launch the web browser of your choice.

Step 3: In the address field, enter the address 192.168.188.1 as the URL.

Step 4: Tap Enter on keyboard.

Step 5: Now, the login section will open for your extender.

Step 6: Enter the current credentials, if you have changed earlier, otherwise enter the default credentials.

Step 7: Click over the Login button.

Step 8: Now, you will land on the admin page of the extender.

On the admin page, you can do the configuration for your router like setting up the password for an extender for future use, changing the name, etc. So, with this, you will complete the setup of your extender. Now to bring the extender into use, you need to follow the steps given below.

Completing Setup for Extender!

Now, once you have completed the setup for your extender, then you need to place it at the optimal location. It is so because only then you can have the real benefits of the extender with the full coverage of the network. 

Step 1: Disconnect the extender from the setup place.

Step 2: Connect it to the power supply which is halfway between the existing WiFi router, and the dead zone.

Step 3: Then, switch on the extender.

Step 4: Now, try to connect your device with the extender, by entering the password that you have selected.

Step 5: If it got connected successfully, then your setup is complete.

Covers the Range!

With the extender setup, you can cover up the area of your building, home, or office which is not possible before with a router. Therefore, now you are able to complete your work with full efficiency, without any fluctuation of the network. So, complete the 192.168. 188.1/login, and enjoy your network range!